juniper

All of the work through the modules thus far in the series have brought us to what we all want to see. How to get or update device information inside of Nautobot. Adding of sites, device types, device roles are required to get us to this point. Now you can see how to add a device to Nautobot using the networktocode.nautobot.device module. There are many optional parameters for the module specifically.

A device type is the next piece in the Nautobot Device onboarding requirements. The device type corresponds to the model number of the hardware (or virtual machine). This is where you are able to template out devices during their creation. So if you have a console port on a device type, that console port will be created when you create the device. However, there is NOT a relationship built between the device type and the device.

A device role is aptly named, the role of the device. This is likely to be something that is meaningful to your organization and could change. For example you may have the 3 tier system of Core, Distribution, and Access layer environments. These are just fine. So you would want to have the roles there to reflect this reality. You may have leaf-spine environments, there are two more roles. And in my past I have also had roles that would indicate that there are dedicated DMZ, WAN edge, Internet edge devices.

Platforms are an optional item when adding devices into Nautobot. The platform is the OS that you are going to be using. Most often this is used to help identify which driver your automation platform is going to be using. Specifically the slug of the platform is what needs to match. So in the terms of Ansible (since we are using Ansible to populate Nautobot), you will want to set Cisco IOS devices to ios.

Adding your manufacturers via code is the easy way to get started with your Nautobot devices. Immediately after adding Sites, the next thing to get going when using Nautobot as your Source of Truth is to add in Manufacturers. These are just that, who makes the gear that you use. For this demonstration you will see adding just a few manufacturers. I’m not necessarily picking on any vendors and who should or shouldn’t be here.

All of the work through the modules thus far in the series have brought us to what we all want to see. How to get or update device information inside of NetBox. Adding of sites, device types, device roles are required to get us to this point. Now you can see how to add a device to NetBox using the netbox.netbox.netbox_device module. This post was created when NetBox was an open source project used often in my automation framework.

A device type is the next piece in the NetBox Device onboarding requirements. The device type corresponds to the model number of the hardware (or virtual machine). This is where you are able to template out devices during their creation. So if you have a console port on a device type, that console port will be created when you create the device. However, there is NOT a relationship built between the device type and the device.

A device role is aptly named, the role of the device. This is likely to be something that is meaningful to your organization and could change. For example you may have the 3 tier system of Core, Distribution, and Access layer environments. These are just fine. So you would want to have the roles there to reflect this reality. You may have leaf-spine environments, there are two more roles. And in my past I have also had roles that would indicate that there are dedicated DMZ, WAN edge, Internet edge devices.

Platforms are an optional item when adding devices into NetBox. The platform is the OS that you are going to be using. Most often this is used to help identify which driver your automation platform is going to be using. Specifically the slug of the platform is what needs to match. So in the terms of Ansible (since we are using Ansible to populate NetBox), you will want to set Cisco IOS devices to ios.

Adding your manufacturers via code is the easy way to get started with your NetBox devices. Immediately after adding Sites, the next thing to get going when using NetBox as your Source of Truth is to add in Manufacturers. These are just that, who makes the gear that you use. For this demonstration you will see adding just a few manufacturers. I’m not necessarily picking on any vendors and who should or shouldn’t be here.